Windows 10 recovery hatas 0xc00000e9 free

Looking for:

Fix 0xc Error Code on Windows 10⠀| DiskInternals

Windows 10 an unexpected i/o error has occured - Microsoft Community - Recent Posts

Windows error code 0xce9 is a common Windows Boot Manager error that indicates either a hardware failure or a corrupted system file encountered during the boot process. It appears shortly after the computer starts, but before the Windows login screen, as follows:.

The 0xce9 error code always has to do with the boot process for Windows. Because it's common, there are many reasons why the error might appear:.

Try these steps in order until the error goes away:. Reboot the computer. If you can't log in to your computer, perform a hard reset by holding down the power button until the computer shuts off, then turn it back on. Restarting a computer fixes many problems. If the error continues to occur, do some further digging to determine the underlying cause. Disconnect all external devices. Remove peripherals such as external hard drives , flash drives , and other USB devices, then restart the computer.

These extraneous devices can interfere with the boot process at times. Remove them one-at-a-time to figure out which device is at fault. Scan Windows for errors. If Windows loads successfully after a reboot, use the built-in Windows Error Checking tool and the SFC scannow command to check the hard drive and system files respectively for problems.

The Windows Error Checker tool can also be run from the command prompt using the chkdsk command. Boot into safe mode. When Windows doesn't boot normally, you can often access the operating system in safe mode. If that works, you can perform many of the troubleshooting steps below from within Windows. Update the drivers. Perform a Windows Startup Repair. If you can't log in to Windows, use a Windows disc or a prepared USB drive that includes the Windows automatic repair tools.

A Startup Repair can fix corrupt system files, registry errors, and missing content that sometimes cause this error to show up. Scan the PC for malware. If a virus prevents Windows from booting, use a bootable antivirus tool. Download an antivirus program for Windows on another machine and copy it to a bootable drive. Most virus tools include a bootable rescue tool that scans a system from a command prompt. Test the hard drives. The easiest way to do this is to use a free hard drive testing tool.

If you have access to the command prompt, run the tool from there without removing the hard drive. Another option is to replace the hard drive with another drive you know works. You might also try the hard drive in another machine.

Change the boot order. The boot sequence may have changed if you installed a new hard drive, plugged in an external drive, or connected a USB device. It can also occur when you update the system BIOS. Updating the volume boot code should fix this problem. Volume boot code problems can also cause additional problems, including Hall. Similar to the volume boot code, the Master Boot Record contains data necessary for loading Windows.

Disable Windows Secure Boot. The Secure Boot feature can prevent external hardware or software from working with a computer. Temporarily disable it to see if that fixes the problem. Perform a system restore. If the problem started occurring after you installed a new device or program, use the Windows system restore function to roll back the operating system to a previous state.

A system restore erases changes made to Windows since the selected rollback date, so back up files that you want to keep. Perform a clean install of Windows. Reinstalling Windows overwrites all changes made to the system. As a result, system files that were corrupted or missing are restored to proper working order.

Check for component failures. If possible, look inside the computer for anything that may be loose or disconnected. Do the same for any external devices that caused the error. If you identify a hardware problem, you can fix it yourself or contact the manufacturer for help getting the computer fixed.

Before you open up a computer or other hardware, check to see if the device has a warranty. You may be able to get it professionally serviced for free.

In the Windows Logs menu, select System. Select it to find the faulty driver. This error indicates you may not have permission to access the device, path, or filename. Under Group or user names , select Edit and ensure you have administrative permissions.

If you get an error when connecting to the Windows Live Calendar service, your account may have been upgraded, and your contacts and calendar are no longer in sync. If you can still log in, ignore the error and continue. Or, sign out and access the calendar at the calendar.

When you visit this site, it may store or retrieve information on your browser, mostly in the form of cookies. Cookies collect information about your preferences and your device and are used to make the site work as you expect it to, to understand how you interact with the site, and to show advertisements that are targeted to your interests.

You can find out more and change our default settings with Cookies Settings. By Briley S. Briley S. His work is featured at Ideaing, Smartwatches. Tweet Share Email. The Best Antivirus Software for Windows How do I fix a "system thread exception not handled" error in Windows 10?

How do I fix the "Windows cannot access the specified device, path, or file" error? How do I fix an error when attempting to connect to the Windows Live Calendar service? Was this page helpful? Thanks for letting us know! Email Address Sign up There was an error. Please try again. You're in! Thanks for signing up.

There was an error. Tell us why! More from Lifewire.